Work Boats > Tugs >
IMPORTANT
The particulars and specifications are supplied by the vendor and not Workboats NZ Limited. Such information has not been verified and may be incorrect. Please do not rely on particulars and specifications unless you have verified their accuracy.
|
31m Deepsea/Harbour ASD Tug
Listing ID:
370382 |
|||||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||||
| Currently under construction at Cheoy Lee Shipyards and built to BV classification, this Deepsea/Harbour ASD Tug measuring 31.00mx 9.50m with a maximum draft of 3.87m has an all Nigata propulsion system comprising of a pair of Nigata main engines each developing 2000 hp @ 750 rpm driving through twin Z-Pellers to provide a bollard pull of 53.5 tonnes ahead and 47.6 tonnes astern. This arrangement gives a service speed of 13 knots. POA | |||||||||||||||||||
|
58m Anchor Handling Tug / Supply Vessel
Listing ID:
368823 |
|||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||
| The Cheoy Lee 58m Anchor Handling Tug/Supply Vessel is a model in high demand, however two units currently under construction are available. Typical duties are to supply, support and act in the capacity of a safety vessel, for offshore drilling and work over rigs on a twenty-four hour per day basis. Specific duties might include the transportation of fresh water, diesel oil, bulk cement, liquid mud, stores, materials and equipment, tow/move drilling and work over safety rigs, anchor handling duties, move men and materials between platforms and shore, and evacuate casualties. POA | |||||||||||||||||
|
Z-Tech 7000 Tractor Tug
Listing ID:
368796 |
|||||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||||
| New Build from Cheoy Lee, the Z-Tech 7000 ASD is a powerful tug fitted with larger main engines to provide a bollard pull of 70 tonnes. Two Caterpillar 3516B, 2682hp diesels drive a pair of azimuthing Schottel rudder propellers. POA | |||||||||||||||||||
|
47m Multipurpose / Diving Support Vessel
Listing ID:
368737 |
|||||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||||
| 47m Multipurpose Dive Support Vessel with DP2, Built Spain 2008, Main Engines Caterpillar 2 X 3150 BHP, TBP 64 Ton, Fitted with ROV + decompression chamber and ROV Office. Owners are keen to sell. Prompt inspection available at yard in the Mediterranean. Asking Price: US$ 14,000,000.00 | |||||||||||||||||||
|
31m Harbour Tug Boat
Listing ID:
339463 |
|||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||
| 31m Harbour Tug (1974) 3,000 HP, 40 T BP | |||||||||||||||||
|
1200 HP Tug
Listing ID:
338962 |
|||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||
| 1200 hp single screw 18m Tug, built 1991, Nagata main engine. Asking JPY 38,000,000 | |||||||||||||||||
|
28m Towing and Anchor Handling Tug
Listing ID:
338761 |
|||||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||||
| 2400 hp 28m Towing & Anchor Handling Tug, Yanmar Main Engines, Kort Nozzles, Built 1996 Kanbara Shipbuilding Japan. Price Notes JPY 190 000 000 | |||||||||||||||||||
|
31M Harbour Tug with Chemical fire-extinguishing system
Listing ID:
321274 |
|||||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||||
| 31m Harbour Tug equipped with Chemical fire-extinguishing system. Launched in 1982. Fuji Diesels (2) with Niigata ZP2A type Propeller System. Bollard Pull: 36 tons fwd & 34 tons astern. Lying Japan. | |||||||||||||||||||
|
Commercial Stern Trawler 28m Converted to Tug
Listing ID:
1981 |
|||||||||||||||||
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=270)
|
|
View Boat Details | |||||||||||||||
| Capable and Successful Vessel - Built in Canada 1989 - Set up for bottom and mid water trawling. - Deutz S/BVM 628 Main engine - 1838KW at 970rpm - Full H&G Processing - Ice Maker - 320 cu/m hold capacity - In Class with Germanischer Lloyd - 2 x Pillar 550KKA shaft generators - 1 x Caterpillar 3406 with Pillar 220KVA Generator - Fully comprehensive modern navigation and fishing electronics - Good quality accommodation | |||||||||||||||||
IMPORTANT
The particulars and specifications are supplied by the vendor and not Workboats NZ Limited. Such information has not been verified and may be incorrect. Please do not rely on particulars and specifications unless you have verified their accuracy.
|
Workboats International provides Boat and Ship Sales, Marine Insurance, Business Opportunities and Consutancy Services |
||
|
Workboats International - Australia - Indonesia - New Zealand - Philippines - USA |