Multi-purpose 17.5 MTR FWD WHEELHOUSE

Listing ID: 238866

DESCRIPTION: FWD Wheelhouse Scallop Dredger/Cray Boat LENGTH: 17.5 Mtr BEAM: 5.7 Mtr DRAFT: 2 Mtr DISPLACEMENT: USL 3B Spec LOCATION: Tasmania BROKER: Workboats Intl PRICE NOTES: $750,000 AUD plus GST if any

General Description:

17.5 MTR FWD WHEELHOUSE

Length on deck -  17 mtr

Beam -  5.7 mtr

Draught -  2 mtr

HULL AND FITOUT ALL TO USL 3B REQUIREMENTS

Hull Is Welded Steel Construction – 6mm

Fuel – 3 tanks – total 12,400 litres

Fresh Water – 2 tanks – total 4.400 litres

Main Motor – Iveco – 300 hp

Gearbox – Twin Disc MG5091DC – 4.5/1 reduction

Genset – 20kva Isuzu

Cummins 6BT 5.9-C to drive hydraulics for scallop winch

Hydraulic Anchor Winch

Hydraulic Boom Winch

Hydraulics running off Main Motor

All Bilge, Tank and Fuel Plumbing – 316 Stainless Steel

STEERING

Twin Ram Hydraulic/Electric

2 Stations

ELECTRONICS

Radar – Furuno 1832

Echo Sounder – Furuno Dual Frequency

Automatic Pilot – Simrad AP35

Plotter – Furuno

3D Imaging

Radios – HF & VHF

Television & Video

Guages and Alarms for both Motors

2 Steering Stations -  in and behind Wheelhouse

FISH HOLD CAPACITY

Fish Room – refrigerated – 24.5 cubic metres

Bait Freezer – 7.14 cubic metres

10 tonne Wet Well or 20 tonne circulating tank

Bitzer 3 phase compressor

ACCOMMODATION

4 Bunks in Foc’sle

2 Bunks in Wheelhouse

Toilet & Shower

Electric Hot Water

GALLEY

Electric Stove

Fridge/Freezer

Microwave

Seating and Table

Built in Cupboards

Sink and Pressurised Water System

Captain Chair

ELECTRICAL SUPPLY

415 Volt

240 Volt

12/24 Volt DC

Shore Power Inlet

PAINT SYSTEM

All Steel Sandblasted and Painted with zinc based Jotun Product to manufacturer’s specification

UNDERWATER AREA – Painted with antifouling, zinc anodes fitted

SURVEY EQUIPMENT

1 x Four Man Liferaft

All Safety Equipment as per USL 3B requirements

Anchors & Chains to USL 3B requirements

Download as PDF