NEW BUILD - AMF 5.8m RIB Jet Boat
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=400) |
Listing ID: 367475
Send Enquiry |
General Description:
AMF 580 QRV ((Quick Response Vessel)
HULL:
AMF 580 QRV Hull
Beam - 2.8m with tubes
6mm bottom,6mm sides, 4mm plate wet deck.
All plate Aluminium is high tensile 5083marine grade
Under-floor fuel tank (approx 150l), with filler, breather and fitted with oringed
cleaning port.
Full transom boarding platform with heavy duty tube edging and supports.
Raised wet deck with Alloy fabricated commercial style scuppers
All work surfaces to have 3M rubber tread decking
Centre console with jockey seating for two plus storage beneath rear seat
2 x grab rails around console
2 x bow grab rails
Single tube grab rail between seats
Anchor bin with drain holes, tie loop, hinged lid and latch
Bow storage locker, with plastic access hatch, beneath anchor bin
Large instrument panel (panel has room for a 10" screen and 2 VHF
radios)
1 x bow and 1 x stern samson posts, Alloy fabricated heavy duty type,
braced to inside of hull structure
Alloy tube fabricated folding utility arch, designed for easy access via either
side from platform, with mounting plates for antennas and nav lights
Folding bow sprit with roller and tie down points
2 x Alloy fabricated bollards to transom
2 x Alloy fabricated tow bridle loops to transom
Wet deck Alloy fabricated tie point x 6
Two transom storage lockers with hinged lids and latches
Upholstered seating for two and upholstered engine cover
Chemical wash and Nyalic clear coat finish (painted option available on
request at additional cost)
DRIVE:
Mercruiser 200Hp Optimax petrol jet drive fitted, with standard accessories
Wet exhaust via muffler box coupled with wired rubber hosing. All joints
fitted with tandem S/S clamps.
Smart Craft gauges
Steering, Mercruiser cable type system
Single binnacle hand control
TUBES:
The tubes will be heavy duty Hypalon fitted with grab ropes and reinforcing
to work areas. Colour to be from standard colour range as advised by
purchaser
NOISE CONTROL SYSTEM:
Acoustop foil faced sound proofing to engine cover & compartment with all
cut edges taped.
ELECTRICS:
Inc LED Nav lights, 1 port, 1 stbd, 1 masthead
Hella LED Deck Light
2 x heavy duty plug sockets supplied, fitted & wired up
Simrad NX40 GPSx10 NZ Chart 600w triducer
2x Cobra VHF radio's and antenna's
Batteries: 1 x start, 1 x house battery, with battery boxes, (all latest
technology maintenance free type) fitted to forward seat compartment along
with engine oil reservoir
BEP isolating switches for each battery plus one to cross link for emergency
start.
1 x 6 way circuit breaker day panel to console
VSR unit, to charge house battery
All cabling to be tinned copper double insulated.
SAFETY EQUIPMENT:
1 x 2000 GPH to engine bay with automatic switch & alarm, 1 x 2000GPH
wandering hand pump.
Galvanised anchor, 55M rope & 6M chain
Life ring and mount, supplied and fitted to boat
Marine fire suppression system - Sea-fire FM200, manual/automatic
operation, supplied and fitted to engine bay
Manual operated fire shut off flaps to engine bay air intakes
Compass - Plastimo 100, with light, fitted and wired up
TRAILER:
Voyager, 580 QRV single axle, (non-braked) galvanised multi-roller trailer
(Note: does not include on-road costs)
SURVEY:
Plan approval by Survey Nelson of New Zealand for New Zealand Safe Ship Management.
Survey Nelson inspections, stability testing, procurement of building
confirmation letter
(Note: Price does not include SSM costs or procurement of final on water ticket)
COMMISSIONING:
Rigged to turn key stage.
Costs to cover fuel, oil and testing time.
TOTAL COST FOR STANDARD FIT OUT EXCLUDING GST: NZD $128,423
Note: Does not include any other equipment required to pass survey other than that listed in
this specification. Prices are subject to change, in particular the drive unit parts, there-fore this
price is current for 30 days from when dated. This price is ex AMF Factory, New Zealand.
